Polymer Sciences, Inc. Locations, Contacts and
Directions:
- PSI \ Corporate Offices:
(866) 360-1465
(770)
664-2005
- 4080 McGinnis Ferry Rd. Suite 503
Alpharetta, GA. 30005; U.S.A.
Joni Patton, Office Manager
-
- PSI \ Wheaton Facility:
(404) 346-0696
5800 Wheaton Dr, S.W.
Atlanta, GA. 30336; USA
Mark Roberts, Plant Manager
PSI \ Miamisburg Facility:
(937)
866-6370
325 N. Riverview Ave.
Miamisburg, OH 45342
(a suburb of Dayton, Ohio)
Larry Werner, Plant Manager
-
-
PSI \ Plastics & Materials Recycling S. de R.L. de C.V.:
(222) 224-4141
- Lateral de la Autopista,
Mexico-Puebla, No. 7516
Bodega No. 5, Ex-rancho Moratilla
Puebla, Pue., C.P. 72160
- Alejandro
Villegas, Plant Manager
-
-
- PSI \ By-Products Recovery Facility
(affiliate)
(864)
646.5711
- 6516 Clemson Blvd.
- Anderson, S.C. 29670
Jeff Joyner, President & Plant Manager
Corporate
Contact Information: 011.770.664.2005
011.866.360.1465
Personnel &
Phone
Departments:
Extensions:
Joni Patton, Finance & Office Manager
Accounting / Financial
Accounts Receivable
Accounts Payable extension #10
Warren Owens, VP of Sales and Operations:
U.S., Canadian & International Programs / Operations
Customer, Vendor & Supplier Services
Environmental Management Programs Coordinator
Supervisor for:
Material
Management Programs North America
Material Management Programs International extension #11
Michael Montgomery, President/CEO
Administrative & Corporate Head
Project Development
European Programs
Production Head
extension #12
Carlos Freire, Latin American Operations Manager
Mexican & Latin American Programs / Operations
Production,
Traffic & Scheduling extension #13
(Habla Español)
Project Development
North America Resources,
Sales & Marketing Manager
Materials Sales
Material Management Programs for Recycling extension #11
Technical
Research & Development extension #12
Tim Mitchell, Sales & Resource Coordinator
North America Sales & Resources
Materials Sales
Material Management Programs for Recycling extension #17
Debby Pool, Transportation & Sales
Trafficking, Shipping & Scheduling
Packaging
Customer / Supplier Hot Line
extension #20
-
- Main Telephone:
- (011)
770.664.2005
- Toll Free:
- (866) 360.1465
-
- FAX:
- (011)
770.664.0680
- Electronic e-mail:
- send to PSI
- then the at sign - @ - followed by...
- "polymersciences"
- then dot com
DRIVING DIRECTIONS:
Wheaton:
The Wheaton facility is located in N.W. Atlanta off Fulton Industrial Blvd. The
address is 5800 Wheaton Dr., N.W. Atlanta, GA. 30336-2624.
Fulton Industrial Blvd (FIB) is off of I-20 on the N.W. side of Atlanta near
Camp Creek Pkwy outside 285 Perimeter.
From Perimeter 285 or from I-20 Traveling North away from Atlanta
proceed North / West on I-20 away from Atlanta (if on 285 take the I-20 exit
towards Birmingham) FIB is the 1st exit once on I-20 just past the 285 interchange,
proceed down the exit ramp and turn left onto FIB and proceed with directions
below...
From I-20 traveling South towards Atlanta it is the 1st exit after the
Six Flags exit just before you reach Perimeter 285 exits, turn right onto FIB
and proceed with directions below...
Once on Fulton Industrial Blvd, turn right
onto Great Southwest Pkwy about 2.5 miles down on the North-West side of the road
under the enormous metal superstructure for the "Atlanta Gateway Park" entrance; proceed under the superstructure
following Great Southwest Pkwy to Villanova Dr. about 1 mile down on the right,
turn right onto Villanova and drive all the way down to the end where
Villanova dead ends into Wheaton Dr., turn right onto Wheaton Dr. and our plant
entrance is immediately on the left. It is a large brick building with green
awnings. Look for the red door on the side of the building located next
to the car parking area and the picnic table; bins are located next to the red
door outside for drop off day or night.
From Camp Creek Pkwy. travel to the FIB Intersection outside Perimeter
285 and turn to go North or East on FIB going towards I-20, and proceed with directions
below...
Once on Fulton Industrial Blvd, turn left
onto Great Southwest Pkwy (it is the 1st light or 2nd road on the left after the
Camp Creek Pkwy & Fulton Industrial Intersection); proceed to Villanova Dr.
about 1/4 mile down and turn left onto Villanova, drive all the way down to the end where
Villanova dead ends into Wheaton Dr., turn right onto Wheaton Dr. and our plant
entrance is immediately on the left. It is a large brick building with green
awnings. Look for the red door on the side of the building located next
to the car parking area and the picnic table; bins are located next to the red
door outside for drop off day or night.
Miamisburg:
From the Dayton
Airport,
Proceed south from the airport to I-70 east (Dayton). Go
about one mile to 1-75 South. Proceed on 1-75 South through Dayton to the
Miamisburg-Centerville Exit (Exit #44) which will be State Route 725.
Turn right towards
Miamisburg and stay on Route 725 through the city and across the Miami
River Bridge...at the bottom of the bridge is the intersection of 725 and
Miamisburg Soldiers Home Road. Turn right and the plant sets on that corner
(large white building). Go to Dock 9 for entrance.
PMR Puebla Facility:
Plastic
and Materials Recycling is located in Puebla. The address is Lateral de la Autopista
Mexico - Puebla, No. 7516,
Bodega No. 5, Ex-rancho Moratilla,
Puebla, Pue., C.P. 72160
From
Veracruz: Take the route Veracruz-Cordoba-Orizaba-Puebla (Route Mex 150D),
arriving Puebla pass the Amozoc Toll, take the side road (lateral) using exit
Boulevard Hermanos Serdan-Tlaxcala (KM 121), pass under the bridge and keep on
the side road (lateral). PMR is 200 mts on your right (Km 119.8) right after
Mercedes Benz Trucks dealer.
From Mexico City: Take
the route Mexico-Puebla (Route Mex 150D), pass two Tolls (San Marcos and San
Martin Texmelucan). At Km 120, to make a U turn, take side road (lateral) on
exit Puebla-Boulevard Hermanos Serdan, go under the bridge and take the return
to Mexico City-Tlaxcala. Take exit to Mexico City - Airport and keep on side
road (lateral). PMR is 200 mts on your right (Km 119.8) right after Mercedes
Benz Trucks dealer.
From
Tlaxcala: Take route Tlaxcala-Puebla (Route Mex 119). Pass Panzacola and
Zacalelco towns and get to a fork with route Mexico - Puebla. Take right exit to
Mexico City and keep on side road (lateral). Pass under the bridge. PMR is 200
mts on your right (Km 119.8) right after Mercedes Benz Trucks dealer.
From
Downtown Puebla: From Zocalo, take Calle 3 Oriente. Turn right on Boulevard
Atlixco. Take Boulevard Hermanos Serdán to exit Route Mexico - Puebla. Take exit
to Mexico City and keep on side road (lateral). PMR is 200 mts on your right (Km
119.8) right after Mercedes Benz Trucks dealer.
|